HDMI connects to devices that use HDMI cable, such as Blu-ray or HD DVD player, or HD cable / satellite set-top box. This HDMI also supports CEC (consumer electronics control) functions including audio return channel. Under ultra HD 4K x 2K resolution this connection supports 60 Hz refresh rate and HDCP 2.2. 2.0) – HDMI 3 houses a HDMI version 2.0 connection. This port also can accept a HDCP video device for video such as PC. This connection port receives pure digital audio and high definition signal through one single cable. This HDMI also supports ARC (audio return channel) / CEC (consumer electronics control) functions (no audio return channel). Under ultra HD 4K x 2K resolution this connection supports 30 Hz refresh rate. 1.4) – HDMI 4 houses a HDMI version 1.4 connection. You can either use the 3.5mm mini-jack for connection or purchase a 3.5mm mini-jack to female RCA conversion cable from any electronic store to connect to your analog audio receiver.
For YPbPr connect green, blue, and red for video, and then connect white for left channel audio, and red for right channel audio. YPbPr / AV– This connection port is for DVD players or satellite / cable settop boxes that use component or composite cables.The black (optical SPDIF OUT) connector sends out either bit-stream or PCM digital sound signal to a home theater receiver with digital optical input. SPDIF - This connection port is used for sending out digital audio signals to digital surround sound receivers.Top two mounting holes are 15mm deep and the bottom two mounting holes are 9mm deep. Mounting Specification: 400mm x 200mm using 4 screws sized at M6 (not included).REMOTE SENSOR – The remote sensor receives all the commands from the remote control.The display might take 10 – 12 seconds to power on. The light turns blue when the display is turned on. INDICATOR LIGHT – The light is red when power is plugged in but the display is not turned on.Identifying Front and Rear Panel Front View
SPECTRE 65 INCH TV INSTALL
SPECTRE 65 INCH TV TV
To install the feet of the TV, lay the TV flat on a table. Any 90° clockwise or counterclockwise installation may induce poor ventilation and successive component damage.ġ. Please ensure the product is installed with the screen in landscape orientation.
Avoid installing the product in the kitchen, bathroom or other places with high humidity dust or smoke, so as not to shorten the service life of the electronic components. If you would like to mount the display onto the wall, please see page 8, and 10 for additional information.
Space should be maintained between the back of the product and the wall for proper ventilation. The product should be installed on a flat surface to avoid tipping. The cord must be grounded and the grounding feature must not be defeated. When an extension cord is required, use one with the correct power rating. Please use the power cord designated for the product.
SPECTRE 65 INCH TV MANUAL
0 kommentar(er)
